Improvement of bypass circuit biocompatibility: comparison and combination of heparin-coated circuit and nitric oxide gas infusion.
Academic Article
Overview
abstract
OBJECTIVES: Nitric oxide (NO) gas infusion to the oxygenator, as well as heparin-coated bypass circuits, have been reported to attenuate blood activation induced by the interaction with the artificial surfaces of an extracorporeal bypass circuit. Using a mock circulation model, we compared the effect of each and also evaluated the effect of their combination on attenuating bypass-induced blood activation. METHODS: A miniature closed bypass circuit was primed with diluted fresh human blood and perfused for 180 minutes using a centrifugal pump. NO gas (0, 50, or 100 ppm) was infused to the oxygenator sweep gas of either a non-heparin-coated or a heparin-coated circuit. Platelet counts, beta-thromboglobulin, platelet factor 4, complement-3 activation products and granulocyte elastase were measured at 0, 30, 60, 120, and 180 minutes after starting the perfusion. RESULTS: One hundred ppm of NO was statistically equivalent to the heparin-coated circuit for attenuating bypass-induced blood activation, and a combination of the two significantly surpassed the results of either modification alone. Fifty ppm of NO alone provided only a slight attenuation of blood activation as compared with the non-heparin-coated circuit, though the difference was not significant. A combination of 50 ppm NO and the heparin-coated circuit did not significantly enhance the effects of the heparin-coated circuit alone. CONCLUSIONS: The combination of NO gas infusion and heparin-coated circuits appears to be a useful and promising modification for enhancing the attenuation of bypass-induced blood activation, though the optimal dose of NO infusion in terms of effectiveness and adverse effects to the whole body remains to be established.
